5 Port 10/100/1000Mbps POE Ethernet Switch
TS06P-4G-1G
Product Description:
The TS06P-4G-1G is a full Gigabit unmanaged POE switch, which provides four DATA+POE interfaces and one pure data interface. Among them, port 1 support HI-POE max 60w output and 2-4 follows the 802.3af/at standard and supports maximum power output of 30w. The POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps and 1000Mbps.
The TS06P-4G-1G is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.
The TS06P-4G-1G adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy switching between shared or port isolation modes. In the port isolation mode, 1-4 ports cannot communicate with each other, only through port 5 to output data. This mode can effectively suppress the generation of broadcast storms.
Product Features:
- Ports 1 max 60w POE output
- Support POEdog function，When a port goes down or the response becomes slow, the port can be automatically restarted to reactivate the PD device
- Comply with IEEE 802.3, 802.3i, 802.3u, 802.3ab, 802.3x, 802.3q, 802.3af/at specifications.
- 5*10/100/1000Mbps interface, support for auto-negotiation.
- 4*10/100/1000Mbps POE interface, support 802.3af/at standard, maximum 30w power output.
- External 60w power adapter.
- Adopt high-speed Store-and-Forward transmission mode.
- Support 9k jumbo frames
- Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
- 2K Mac address table
- One DIP switch supports port isolation setting.
- Port status LEDs
Product Specifications:
|
Model
|
TS06P-4G-1G
|
|
Port
|
1000M POE
|
4
|
|
1000M Uplink
|
1
|
|
Performance
|
Store and forward
|
Support
|
|
Switching Content
|
10G
|
|
MAC Table Size
|
2K
|
|
Usage environment
|
Operating Temperature：0℃～45℃
Storage Temperature：-40℃～80℃
|
|
Working humidity：10%～90% RH Non-condensing
Storage humidity：5%～90% RH Non-condensing
|
|
POE Standard
|
IEEE802.3af/at/HI-POEmaximum 60W
|
|
Power Input
|
AC Input 52V 1.25A
|
|
Supported Standards and Protocol
|
IEEE 802.3 Ethernet Media Access Control Protocol
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af/at/HI-POEpower supply through UTP cable
IEEE 802.3x Flow Control
IEEE 802.1q VLAN Bridge Operation
|
|
Operation Mode
|
Standard sharing, Port isolation (via DIP switch setting)
|
|
Data Transfer Rate
|
Ethernet 10Mbps half-duplex, 20Mbps full duplex
Fast Ethernet 100Mbps half-duplex, 200Mbps full duplex
Gigabit Ethernet 2000Mbps full duplex
|
|
Network Media
|
10Base-T:2 pair (Cat3) or above UTP/STP (≤150m)
100Base-TX:2 pair（Cat5）or above UTP/STP(≤150m)
1000Base-T:4 pair Cat5e）or above UTP/STP(≤150m)
|
|
Dimension
|
140*80*28mm
|
|
Safety Regulations
|
FCC,CE,RoHS-Compliant,BSMI
|
